Black & Decker 9434 User Manual

Essential safety guidelines for operating the table saw.

Details on using appropriate extension cords for safety and performance.

Information on motor requirements and lubrication for optimal operation.

Lists components for installing the saw blade and fence assembly.

Lists components for the guard and spreader assembly.

Ensures the saw blade is set at a 90-degree angle to the table surface.

Ensures the saw blade is parallel to the miter gauge slots for accurate cuts.

Steps to mount and align the rip fence parallel to the miter gauge slot.

Lists hardware needed for assembling and mounting the guard.

Steps to align the spreader and guard assembly for proper operation.

Instructions for directly mounting the saw to a workbench surface.

Steps for mounting the saw to a plywood base for portability.

How to use the power switch and reset the overload protector.

Adjusting blade height, angle, and rip fence for optimal cuts.

Instructions for using and adjusting the miter gauge for precise angle settings.

Procedures for making crosscuts and bevel crosscuts with the miter gauge.

Tables of common angles for miter, bevel, and compound cuts.

Key safety rules to follow when ripping wood with the fence.

Guide for cutting with grain, including safe push stick usage.

Safety advice for bevel ripping, especially on the left side.

Cautions for specialty cuts, including guard removal and dado set usage.

Step-by-step guide to assemble the table saw leg stand.

Information on compatible accessories and their use.

Details on different types of saw blades and their applications.