Need help?Do you have a question about the Black & Decker 9419 and is the answer not in the manual?
Steps to ensure the saw blade is set at a precise 90-degree angle to the table.
Instructions for securing the saw directly onto a workbench surface.
Guide for attaching the saw to a plywood base for portability or convenience.
Steps to ensure the saw blade is set at a precise 90-degree angle to the table.
Instructions for securing the saw directly onto a workbench surface.
Guide for attaching the saw to a plywood base for portability or convenience.
General| Type | Circular Saw |
|---|---|
| Amperage | 13 amps |
| No Load Speed | 5, 300 rpm |
| Power Source | Corded Electric |
| Blade Diameter | 7-1/4 inches |
| Voltage | 120V |
| Amps | 13 Amps |
To Next Page