Need help?Do you have a question about the Black & Decker Alligator GK1000-XE and is the answer not in the manual?
General| Power | 1000 W |
|---|---|
| Weight | 3.5 kg |
| Chain Speed | 4.5 m/s |
| Cutting Capacity | 100 mm |
| Power Source | Electric |
| Voltage | 230 V |
| Blade Material | Steel |
Keep work area clean, well-lit, and free from hazards. Avoid explosive atmospheres.
Ensure proper plug matching and avoid contact with earthed surfaces. Use outdoor-rated cords.
Stay alert, use PPE, prevent unintentional starting, maintain balance, and dress properly.
Use correct tool, do not force, disconnect before adjustments, and store properly.
Have tools serviced by qualified personnel using identical parts. Use RCD protection.
Do not use above shoulder height or to fell trees. Be aware of chain position and falling debris.
Instructions for checking and adjusting chain tension using the tensioning device and retention nuts.
Steps for removing and replacing the saw chain and chain bar, with safety warnings.
Procedure for oiling the chain and bar every ten minutes of use to ensure lubrication and longevity.
Explains the double switching system and operation of the unit's actuators.
Techniques for safely trimming branches, including pre-cut checks, speed, and cutting direction.
How to clean the tool, including the chain access cover and ventilation slots.
Regular oiling of specific points (15) as indicated in figure B for tool maintenance.
Advice on how to transport the tool safely with the jaws closed.
Instructions for storing the tool, including wiping metal parts and environmental conditions.
To Next Page
