To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker Deluxe and is the answer not in the manual?
General| Brand | Black & Decker |
|---|---|
| Model | Deluxe |
| Category | Lawn and Garden Equipment |
| Language | English |
Identifies the STAIN/PLUS/DELUXE models of Black & Decker airless sprayers.
Crucial warning to reduce the risk of injury by reading the manual before use.
Covers essential 'DO NOT' and 'ALWAYS' instructions for safe sprayer operation.
Addresses risks from paint/solvent fumes and harmful material inhalation.
Warning regarding lead exposure from coated electrical wires.
Details severe risks of injection injuries from high-pressure spray.
Precautions against ignition sources and proper ventilation for fire prevention.
Instructions for proper grounding and use of extension cords.
Recommendations for cleaning and storing the sprayer to prevent damage.
Step-by-step guide for initial spraying operations and setup.
Step-by-step guide for basic cleaning of the sprayer after use.
Detailed list of all parts included in the Model Deluxe sprayer kit.
Information on how to obtain replacement parts and customer service.
Guidance on practicing with water to master spraying and pattern adjustment.
Instructions on thinning paint or stain to the correct viscosity for spraying.
Choosing the right spray tip and important usage notes for optimal performance.
Pre-spraying checks, cord safety, and material preparation for optimal results.
How to adjust volume control for desired spray pattern and pressure.
Proper distance, motion, overlap, and corner spraying techniques.
Addressing issues like humming sounds or irregular spray patterns during use.
Immediate cleaning steps using solution to prevent dried material buildup.
Detailed process for cleaning internal components of the cylinder housing.
Lubricating internal parts with oil to prevent drying and seizing during storage.
Attaching and bending the flexible extension for hard-to-reach spraying.
Procedure for cleaning the flexible extension after use.
Connecting and using the suction tube kit for drawing material from containers.
Procedure for cleaning the suction tube kit components.
Resolving problems such as the motor not running or making unusual sounds.
Diagnosing and fixing spitting, fogging, leaks, and drawing problems.
Addressing the cause and solution for the motor overheating during operation.
