What to do if my Black & Decker Drill battery pack will not charge?
If your Black & Decker Drill battery pack isn't charging, first ensure the charger is properly plugged into a working outlet. Also, the surrounding air temperature might be too hot or too cold; move the charger and battery pack to an environment where the air temperature is above 40 degrees F (4.5°C) or below 105 degrees F (40.5°C).
General| Type | Cordless Screwdriver |
|---|---|
| Voltage | 8V |
| Chuck Size | 1/4 in |
| Weight | 1.5 lbs |
| No Load Speed | 180 RPM |
| Battery Type | Lithium-Ion |
| Max RPM | 180 RPM |
Guidelines for maintaining a clean, well-lit work area and avoiding hazardous environments.
Precautions regarding plugs, cords, and avoiding contact with grounded surfaces or water.
Advice on staying alert, using PPE, preventing accidental starts, and removing tools.
Specific warnings and advice for safe handling and charging of batteries and chargers.
Comprehensive safety guidelines covering work area, electrical, and personal safety for power tool operation.
Specific safety advice for drills, including handling, workpiece securing, and hot bits.
To Next Page
