Need help?Do you have a question about the Black & Decker BDEG400 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| No-load Speed | 10, 000 RPM |
| Spindle Lock | Yes |
| Amperage | 6.0 Amps |
| Voltage | 120 Volts |
| Wheel Diameter | 4-1/2 inches |
| Spindle Thread | 5/8 inch-11 |
| Switch Type | Slide Switch |
Defines safety symbols and terms used in the manual.
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Save all warnings and instructions for future reference.
Keep work area clean, well lit, and free from explosive atmospheres.
Ensure proper plug matching, avoid grounded surfaces, and protect cords from damage.
Stay alert, use PPE, prevent unintentional starting, and maintain balance.
Use the correct tool, maintain it, and store it properly.
Have power tools serviced by qualified personnel using identical replacement parts.
Follow all instructions and warnings for grinding, sanding, wire brushing operations.
Understand kickback and take precautions to avoid it by maintaining a firm grip and proper positioning.
Use recommended wheel types and guards, and mount them correctly.
Use appropriately sized sanding discs and follow manufacturer recommendations.
Be aware of flying wire bristles and use appropriate safety equipment.
Wear proper hearing and eye protection, and be aware of chemical hazards from dust.
Identifies the main components of the angle grinder.
Information on selecting the correct extension cord gauge based on length and amperage.
Warnings to prevent accidental operation during assembly.
Use the auxiliary handle at all times for complete control of the tool.
Mount the guard securely for operator protection, especially during grinding.
Adjust the guard properly for optimal safety and fit.
Remove the guard only when sanding, and re-install for other operations.
Learn how to fit and remove grinding discs correctly.
Learn how to fit and remove grinding discs correctly.
Instructions for fitting and removing sanding discs and backing pads.
How to mount and use wire brushes and wheels safely.
General operating instructions for the tool.
Guidelines for surface grinding with appropriate wheels.
Guidelines for edge grinding with Type 27 wheels, including depth limits.
How to use wire brushes and wheels for various surface finishing tasks.
Techniques for surface finishing using sanding flap discs.
Guidance on choosing and using sanding discs with backing pads.
Safety precautions for sanding paint, especially lead-based paint.
Warnings to prevent accidental operation during assembly.
Instructions for cleaning the tool using mild soap and a damp cloth.
Information on lubrication, recommending professional service for heavy use.
Warnings and recommendations for using accessories.
Solutions for the unit not starting, checking cord, fuse, or breaker.
To Next Page