Black & Decker G720 User Manual

Esmeriladora Angular de 4-1/2” (115mm)
Esmerilhadeira Angular de 4-1/2” (115mm)
4-1/2” (115mm) Angle Grinder
G720
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
INSTRUCTION MANUAL
ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
ADVERTÊNCIA: LEIA ESTAS INSTRUÇÕES ANTES DE USAR O PRODUTO.
WARNING: READ INSTRUCTION MANUAL BEFORE USING PRODUCT.
Español 4
Português 11
English 16

Black & Decker G720 Specifications

General

Power	720W
Disc Diameter	115 mm
Spindle Thread	M14
Voltage	230 V
Spindle Lock	Yes
Wheel Diameter	115 mm
Cable Length	2 m
No Load Speed	11000 rpm
Power Source	Corded
Speed	11000 rpm

Summary

General Safety Rules

Safety Instructions

General warnings for power tool safety, covering warnings, instructions, and future reference.

Electrical Safety

Precautions related to electrical connections, grounding, cords, and wet conditions.

Personal Safety

Electrical Safety Details

Additional Safety Instructions for Small Angle Grinders

Guard and Disc Fitting

Ensure the guard is correctly fitted and check mounting flanges and discs.

Correct Disc Selection

Use the correct size and type of disc suitable for the task and tool.

Accessory Speed Rating

Verify accessories are rated for spindle RPM; test new wheels for 30 seconds.

Safety Instructions for All Operations

Grinder Intended Use

Prohibited Operations

Approved Accessories Only

Accessory Compliance

Ensure accessory speed, size, and arbour fit the tool's specifications for safety.

Accessory and Tool Inspection

Inspect accessories and tool for damage before use; ensure proper PPE and safe practices.

Further Safety Instructions for All Operations

Kickback Warnings and Prevention

Understand kickback causes and prevention through proper grip, positioning, and avoiding hazards.

Grinding Operation Safety

Adhere to safety for grinding: use recommended wheels/guards, proper mounting, and application limits.

Operation

Switching On/Off

Fitting Discs (Grinding/Cutting)

Fitting Sanding Discs