What to do if my Black & Decker Lawn Mower doesn't start?
If your Black & Decker Lawn Mower doesn't start, there could be several reasons. First, ensure the power is turned on. Check if the fuse is faulty or blown and replace it if needed. If the grass is too long, increase the cutting height and move the mower to shorter grass to start. Finally, the thermal cut-out may have activated; allow the motor to cool and increase the cutting height.
Why does my Black & Decker BEMW351 leave a ragged finish?
A ragged finish or labored motor in your Black & Decker Lawn Mower can occur for several reasons. The cutting height may be too low, so try increasing it. The blade might be blunt and need replacement. The underside of the machine could be clogged, requiring you to check and clear it out (always wear heavy-duty gloves). Lastly, the blade may be fitted upside down; refit it correctly.
What to do if Black & Decker BEMW351 functions intermittently?
If your Black & Decker Lawn Mower functions intermittently, it might be due to the thermal cut-out being activated. To resolve this, allow the motor to cool down and increase the height of the cut.
General| Brand | Black & Decker |
|---|---|
| Model | BEMW351 |
| Category | Lawn Mower |
| Language | English |
Assembling the grass collection box into three pieces before use.
Placing the grass collection box onto the mower's lugs.
Aligning and securing the switchbox to the handle.
Inserting and securing the lower handle into the mower.
Attaching the upper handle to the lower handle using knobs and screws.
Pushing the on/off button and pulling the start trigger.
Releasing the start trigger to stop the motor.
Securing the blade in a vice for sharpening with a file or stone.
Checking blade balance by centering it on a nail or screwdriver.
To Next Page