Need help?Do you have a question about the Black & Decker BES610 and is the answer not in the manual?
General| Brand | Black & Decker |
|---|---|
| Model | BES610 |
| Category | Power Tool |
| Language | English |
Keeps work area clean, well lit, and free from flammable substances, and away from children.
Ensures proper plug matching, avoids body contact with earthed surfaces, and protects against rain and wet conditions.
Remain alert, watch actions, use common sense, and avoid operating under influence of drugs or alcohol.
Always wear eye protection, dust mask, non-skid shoes, hard hat, or hearing protection as appropriate.
Ensure the switch is off before connecting power or battery pack, picking up, or carrying the tool.
Remove any adjusting key or wrench before turning the power tool on to prevent injury from rotating parts.
Keep proper footing and balance at all times to ensure better control in unexpected situations.
Avoid loose clothing, jewellery, or long hair that can get caught in moving parts.
Ensure dust extraction facilities are connected and used properly to reduce dust-related hazards.
Do not let familiarity with tools lead to complacency; always adhere to safety principles.
Use the correct power tool for your application for better and safer performance.
Do not use a tool if the switch is faulty; it is dangerous and must be repaired.
Disconnect power before making adjustments, changing accessories, or storing the tool to prevent accidental starting.
Store idle tools out of children's reach and ensure only trained persons operate them.
Check for misalignment, binding, or breakage of parts. Have damaged tools repaired before use.
Sharp, clean cutting tools bind less, are easier to control, and reduce risk.
Use tools and accessories as instructed, considering working conditions to avoid hazardous situations.
Keep handles and grasping surfaces dry, clean, and free from oil/grease for safe handling.
Have the tool serviced by a qualified repair person using only identical replacement parts for safety.
Hold by insulated surfaces when cutting near hidden wiring to avoid electric shock.
Secure workpiece with clamps or other means to a stable platform for better control.
Never reach underneath the workpiece or insert fingers near the blade or clamp.
Use sharp, appropriate blades to prevent swerving or stalling under pressure.
Ensure pipes or conduits are free from water and electrical wiring before cutting.
Do not touch the workpiece or blade immediately after use; they can become very hot.
Check for wiring and pipes before cutting into walls, floors, or ceilings.
Wait for the saw blade to come to a complete standstill before putting the tool down.
Wear a dust mask for protection against dust and fumes, and protect others in the work area.
Using non-recommended accessories or operations may risk personal injury or property damage.
Tool is not for use by persons with reduced capabilities unless supervised.
Children must be supervised to ensure they do not play with the appliance.
Be aware of residual risks like touching moving parts, changing parts, prolonged use, hearing impairment, and dust inhalation.
To reduce the risk of injury, users must read the instruction manual.
This tool is double insulated, requiring no earth wire. Check power supply voltage.
A damaged supply cord must be replaced by the manufacturer or authorized service center.
The primary switch for turning the tool on and off.
Allows for continuous operation without holding the trigger.
Used for securing and releasing the saw blade.
The base plate that rests on the workpiece during cutting.
Port for connecting a vacuum cleaner for dust collection.
Adjusts the blade's orbital motion for different cutting modes.
Allows adjustment of the tool's speed.
Provides illumination at the cutting area.
Ensure the tool is switched off and unplugged before performing any assembly.
Instructions for securely fitting and safely removing the saw blade.
Slide the vacuum nozzle into the dust extraction outlet for dust collection.
Adjust the shoe plate to left or right bevel angles up to 45° for angled cuts.
Loosen screw, rotate to center, and tighten to reset shoe plate for 90° cuts.
Press the on/off switch to turn the tool on; press again to turn off or use lock-on button.
Set jigsaw speed using the variable speed control wheel for desired cutting speed.
Position the jigsaw over a marked line to follow the cut easily from above.
Pendulum action provides aggressive, faster cuts in soft materials; adjust with dial.
Mode for cutting metal and aluminium, with no pendulum action.
Mode for cutting laminates and hard wood.
Mode for cutting plywood and PVC/Plastics.
Mode for soft wood and fast cutting.
Hold firmly, keep shoe plate against material, let blade run, and apply gentle pressure.
Use the straight assist blade for extra precision in straight cuts.
Tips for minimizing splintering when sawing laminates, including blade choice and sandwich cutting.
Warnings and tips for sawing metal, including using appropriate blades and oil.
Method for making inside cuts by inserting the saw directly into a panel.
BLACK+DECKER accessories are engineered for high quality and tool performance.
Designed for long operation with minimum maintenance; requires regular cleaning.
Always unplug the tool before performing any maintenance or cleaning.
Regularly clean ventilation slots with a soft brush or dry cloth.
Clean motor housing with a damp cloth; avoid abrasive or solvent cleaners.
Safely dispose of the old plug before fitting a new one.
Connect the brown lead to the live terminal in the new plug.
Connect the blue lead to the neutral terminal in the new plug.
Warning: No connection is to be made to the earth terminal.
Follow fitting instructions supplied with good quality plugs. Recommended fuse: 5 A.
Dispose of products and batteries separately from household waste for recycling.
Recycle electrical products and batteries according to local provisions.
Sound pressure (LPA) and sound power (LWA) levels with uncertainty according to EN 62841.
Vibration total values for cutting boards and sheet metal with uncertainty.
Declares compliance with Machinery, EMC, and RoHS directives.
Contact Black & Decker or refer to the manual for additional information.
The undersigned is responsible for the technical file compilation and declaration.
Offers a 24-month guarantee from purchase date, in addition to statutory rights.
Claims require proof of purchase and adherence to Black & Decker Terms and Conditions.
Find guarantee terms and authorized agent locations online or by contacting local office.
Visit website to register product, receive updates, and special offers.
To Next Page