Black & Decker BDCDD12C User Manual

INSTRUCTION MANUAL
12V MAX* CORDLESS DRILL
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 12 volts. Measured
under a workload, nominal voltage is 10.8.
CATALOG NUMBER
BDCDD12C
To register your new product, visit
www.BlackandDecker.com/NewOwner

Black & Decker BDCDD12C Specifications

General

Type	Drill/Driver
Voltage	12V
Max Torque	115 in-lbs
Speed	0-650 RPM
Battery Type	Lithium-Ion
Power Source	Battery
Clutch Positions	11
No Load Speed	0-650 RPM
Chuck Size	3/8 inch

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean and well lit. Avoid explosive atmospheres and keep bystanders away.

Electrical Safety

Ensure proper plugs, avoid body contact with earthed surfaces, protect from rain and damaged cords.

Personal Safety

Stay alert, use PPE, prevent unintentional starting, remove adjusting keys, and maintain balance.

Power Tool Use and Care

Battery Tool Use and Care

Recharge only with specified charger, use only designated battery packs, and keep away from metal objects.

Service

Specific Safety Rules

Important Safety Instructions for Battery Chargers

Important Safety Instructions for Battery Packs

Functional Description

Charging Procedure

Important Charging Notes

Safety Warnings and Instructions: Drills

Installing and Removing the Battery Pack from the Tool

Operating Instructions

Trigger Switch & Reversing Button

How to turn the drill on/off, control speed, and change direction.

Torque Control

How to set the torque adjustment collar for drilling or screwdriving.

Keyless Chuck Operation

Drilling and Screw Driving Techniques

Screw Driving

Drilling

Troubleshooting

Service Information