To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker BDCOS20 and is the answer not in the manual?
General| Type | Oscillating Multi-Tool |
|---|---|
| Power Source | Cordless |
| Voltage | 20V |
| Battery Type | Lithium-Ion |
| Oscillation Angle | 2.8 Degrees |
The primary part of the tool for holding and operating.
Controls the tool's power activation and deactivation.
Adjusts the tool's speed settings for different applications.
Allows quick and easy accessory changes without tools.
The power source for the cordless tool.
Mechanism to detach the battery pack from the tool.
Provides illumination at the work area.
Visual cues for battery charging progress.
Indicators for battery pack conditions like full charge or defects.
Guidelines for maintaining a safe and organized work environment.
Precautions related to the tool's electrical components and usage.
Measures to protect the operator from injury during use.
Precautions and recommendations for sanding lead-based paint.
Safety measures for individual users during sanding operations.
Critical safety instructions for handling battery packs.
Best practices for storing battery packs.
Instructions for cleaning the exterior of battery packs.
Guidelines for safely transporting battery packs.
Table for selecting appropriate extension cord gauges.
Information regarding battery recycling and the RBRC® seal.
Essential safety instructions for operating battery chargers.
Step-by-step guide for charging the battery pack.
Explanation of the charger's function for temperature-sensitive batteries.
Details on the tool's system protecting against overload and discharge.
Key considerations for charging the battery pack.
How to clean the battery charger.
Procedure for changing tool accessories without tools.
Using the adapter to attach non-original accessories.
Guide for attaching and removing sanding sheets.
Steps to insert and remove the battery pack from the tool.
Recommended grip and posture for safe tool operation.
How to use the tool's on/off switch.
Adjusting tool speed using the speed dial.
Instructions for performing cutting operations with the tool.
Safety precautions for plunge cutting tasks.
Guidelines and safety for sanding with the tool.
Instructions for cleaning the tool's exterior and air vents.
