Black & Decker Bright Bar WLB26B User Manual

USING THE HANGING HOOK
The 360° Swivel Hanging Hook allows you to position the Bright Bar
™
for
convenient, hands-free operation.
CAUTION: TO REDUCE THE RISK OF PRODUCT DAMAGE:
• When Hanging Hook is in use, do not shake light.
• When light is hung by the Hanging Hook, do not shake the light or object
that it is hanging from. Do not hang the light from any electrical wires or
anything that it is not secure.
• Only use the Hanging Hook for hanging the Bright Bar
™
. The Hanging Hook is
not intended to support additional weight. Do not attach or hang anything
additional to the light or risk of breakage may occur.
RECHARGING THE UNIT
Insert the Adapter’s DC Connector of the AC/DC Charging/ Power Adapter into
the 12 Volt DC Charging Port. Insert the plug end into a (powered) standard
North American 120 Volt 60Hz outlet. The red Charging Indicator LED will light
to indicate the unit is charging.
Notes: Do not charge for longer than 8 hours. Charge or powers this unit ONLY
with the originally supplied Class 2 transformer. Consult manufacturer
for replacement.
SAFE BATTERY DISPOSAL
This unit contains a nickel metal hydride rechargeable battery,
which which must be must be disposed of properly when it will
no longer retain a charge. For information on recycling this
battery, call toll-free (877) 822-8837.
WARNINGS: TO REDUCE THE RISK OF INJURY / EXPLOSION
• Do not dispose of product in fire as batteries inside this product may
explode or leak.
• Do not expose the unit containing a battery to fire or intense heat as it
may explode.
INTRODUCTION
Thank you for purchasing the WLB26B Black & Decker
®
Bright Bar
™
. Please
read this manual carefully before use to ensure optimum performance and
avoid damage to the unit.
FEATURES
• 26 high-intensity LED bright bar illuminates a wide area
• Corded or cordless operation
• Built-in rechargeable Ni-MH battery (with supplied 120 volt AC
Charging/Power Adapter)
• Hi/Low settings extend runtime
• High impact, weather- and shatter-resistant ABS housing
• 360° Swivel Hanging Hook for hands-free use
• Seven hours continuous runtime on Low setting, four hours continuous
runtime on High setting, on a single charge
• Rubber Base allows unit to sit on flat surfaces
OPERATING THE UNIT
Position the unit as desired. Press the HIGH/OFF/LOW Switch on the side of
the unit.
The up position turns the unit ON in HIGH setting.
The down position turns the unit ON in LOW setting.
The center position turns the unit OFF.
OPERATING THE UNIT CORDED
Insert the Adapter’s DC Connector of the AC/DC Charging/Power
Adapter into the 12 Volt DC Charging Port. Insert the plug end into
a (powered) standard North American 120 Volt 60Hz outlet.
Operate the unit as outlined in the previous section.
5 6
WLB26B_ManualEN_092707.qxp 9/27/2007 12:22 PM Page 5

Black & Decker Bright Bar WLB26B Specifications

General

Brand	Black & Decker
Model	Bright Bar WLB26B
Category	Flashlight
Language	English