To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker BT1500 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Blade Diameter | 10 inches |
| Arbor Size | 5/8 inches |
| Voltage | 120 Volts |
| Max Cut Depth at 90 degrees / Depth of Cut at 90° | 3 in |
Explains the double insulation system and its implications for grounding.
Details the use of polarized plugs for reducing electric shock risk.
Details cutting capacity and procedures for bench mounting the saw.
Instructions for attaching clamp handle, dust bag, stop block, and extensions.
Procedure to adjust the miter scale for accurate angle readings.
How to turn the saw on and off using the trigger switch.
Proper positioning for safe and accurate operation during cutting.
Instructions for performing crosscuts and bevel cuts with the saw.
Guidelines for securing workpieces and supporting long pieces.
Guides for cutting frames, shadow boxes, and compound miters.
Specific instructions for accurately cutting crown molding.
Detailed steps for cutting crown molding laid flat using compound features.
Guidelines for cutting aluminum, bowed material, and plastic pipe.
Common issues and solutions when the saw fails to start.
Troubleshooting steps for poor cut quality and accuracy.
Solutions for problems with blade speed and excessive machine vibration.
Solutions for when the material pinches the saw blade during cuts.
Details on service locations, warranty, and accessories.
