Black & Decker BDCCS20 - User Manual

INSTRUCTION MANUAL
20V MAx* Li-ion 5-
1
/
2 inch (140MM) circuLAr sAw
Thank you for choosing Black & Decker! To register your new product, go to
www.BlackandDecker.com/NewOwner
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.
If you have a question or experience a problem with your Black & Decker purchase, go to
http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under a workload, nominal
voltage is 18.
CATALOG NUMBER
BDCCS20

Black & Decker BDCCS20 Specifications

General

Brand	Black & Decker
Model	BDCCS20
Category	Saw
Language	English

Summary

General Power Tool Safety Warnings

Work Area Safety

Electrical Safety

Critical electrical safety measures to prevent shock hazards.

Personal Safety

Essential personal safety precautions for tool operators.

Power Tool Use and Care

Tool Operation and Maintenance

Battery Tool Use and Care

Safety Instructions for All Saws

Circular Saw Safety Precautions

Specific safety measures for operating circular saws.

Kickback Prevention and Management

Kickback Causes and Effects

Understanding kickback phenomena and its origins.

Kickback Avoidance Techniques

Operator strategies to prevent and control kickback incidents.

Lower Blade Guard Safety

Guard Operation and Inspection

Procedures for safe operation and checking the lower blade guard.

Additional Safety Guidelines

Workpiece Support and Stability

Importance of securing workpieces for safe and controlled cutting.

Extension Cord Selection

Required Personal Protective Equipment

Mandated safety gear for eye, hearing, and respiratory protection.

Kickback Risk Reduction

Techniques to Reduce Kickback

Methods for minimizing kickback during sawing operations.

Battery Charger Safety Instructions

Charger Operating Safety

Crucial safety rules for using the battery charger.

Extension Cord Specifications

Battery Pack Safety and Care

Battery Pack Handling and Usage

Safety precautions for handling, using, and storing battery packs.

Charging Procedure

Battery Charging Steps

Step-by-step process for charging the battery pack.

Important Charging Notes

Optimal Charging Temperature Range

Recommended ambient temperatures for efficient battery charging.

Troubleshooting Charging Issues

Assembly and Adjustment Setup

Safety Precautions for Adjustments

Battery Pack Installation and Removal

Installing the Battery Pack

Removing the Battery Pack

Workpiece Support and Securing

Supporting Large Panels

Securing the Workpiece

Cutting Depth and Bevel Adjustments

Adjusting Cutting Depth

Adjusting Bevel Angle

Shoe and Blade Maintenance

Attaching and Removing the Blade

Instructions for safely mounting and dismounting the saw blade.

Lower Blade Guard Safety

Guard Function and Safety

Warning about the importance and proper operation of the lower blade guard.

Operating the Circular Saw

General Operating Safety Rules

Fundamental safety rules for operating the circular saw.

Selecting the Correct Saw Blade

Performing General Cuts

Switch and Brake Operation

Troubleshooting Common Issues

Unit Start-up and Charging Problems

Unit Shutdown and Battery Issues