How to fix Black & Decker BDCCS18 that will not start?
If your Black & Decker Saw unit will not start, it could be due to the battery pack not being installed properly. Ensure that you check the battery pack installation. Another possible reason is that the battery pack is not charged, so you should check the battery pack charging requirements.
Why does my Black & Decker BDCCS18 shut off abruptly?
If your Black & Decker Saw shuts off abruptly, it might be due to the battery pack reaching its maximum thermal limit. In this case, allow the battery pack to cool down. Alternatively, the unit might be out of charge, so place it on the charger and allow it to charge.
What to do if my Black & Decker Saw battery pack will not charge?
If the battery pack of your Black & Decker Saw will not charge, make sure that the battery pack is properly inserted into the charger until the LED appears. Also, ensure that the charger is plugged into a working outlet. Another reason may be the surrounding air temperature being too hot or too cold. Move the charger and battery to a surrounding air temperature of above 40 degrees F (4.5°C) or below 105 degrees F (+40.5°C).
General| Blade bore | 1.2, 12.7 mm |
|---|---|
| Blade diameter | 140 mm |
| Idle speed (max) | 3700 RPM |
| Sound power level | 87 dB |
| Cutting depth (90º) | 43 mm |
| Sound pressure level | 76 dB |
| Diamond disc | - |
| Vibration emission | 1.5 m/s² |
| Angle setting range | 0 - 45 ° |
| Product color | Black, Orange |
| Dust extraction port | No |
| Power source | Battery |
| Battery voltage | 18 V |
| Battery capacity | 1.5 Ah |
| Saw blade included | Yes |
| Number of batteries included | 1 pc(s) |
Safety rules for the work environment to prevent accidents.
Precautions to prevent electric shock while using the tool.
Guidelines for operator safety and attentiveness.
Best practices for operation, maintenance, and safe cutting.
Explanation and prevention of sudden, uncontrolled saw movement.
Guidance on saw blades and precautions for bystanders.
Information on vibration levels and symbols found on the tool.
Important electrical safety considerations for the tool.
Overview of tool features and how to install the battery.
Guides for setting depth, bevel, and replacing the blade.
Critical safety features like blade guard and switch control.
General sawing advice, hints for performance, and pocket cutting.
Common issues, solutions, and accessory information.
Routine care, cleaning, and responsible product disposal.
Essential safety guidelines for operating the power tool.
Best practices for operating, maintaining, and servicing the tool.
Specific warnings for drills and impact drills.
Information on residual risks and vibration exposure.
Explanation of symbols and warnings found on the tool itself.
List of key components and functionalities of the tool.
Guides for battery installation and changing drill/screwdriver bits.
Instructions for charging the battery and managing its use.
Adjusting rotation, torque, and tips for effective drilling.
Tips for efficient and safe screwdriving.
Routine care, cleaning, and responsible product disposal.
Essential safety guidelines for operating the power tool.
Best practices for operating, maintaining, and servicing the tool.
Proper handling and charging of battery packs.
Specific warnings for hand-held saws.
Precautions for others and information on residual risks.
Information on vibration levels and potential exposure.
Explanation of symbols and warnings found on the tool itself.
Specific safety guidelines for batteries and chargers.
Guides for fitting and detaching blades and batteries.
Operation of the lock-off button for safety.
General operating advice and safety tips for the saw.
Instructions for charging batteries and switching the tool on/off.
Techniques for cutting wood, metal, and performing pocket cuts.
Instructions for flush, vertical, and branch cutting.
Information on accessories and choosing the right saw blade.
To Next Page
