Black & Decker CD9600 - Page 3

3
ENGLISH
––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––
CD1200/CD9600
10MM CORDLESS DRILL/ DRIVER
INTENDED USE
9OUR"LACK$ECKERCORDLESSDRILLDRIVERHASBEEN
DESIGNEDFORSCREWDRIVINGAPPLICATIONSANDFORDRILLINGIN
WOODMETALANDPLASTICS4HISTOOLISINTENDEDFOR
CONSUMERUSEONLY
GENERAL SAFETY RULES
7ARNING2EADALLINSTRUCTIONS&AILURETOFOLLOWALL
INSTRUCTIONSLISTEDBELOWMAYRESULTINELECTRICSHOCKFIRE
ANDORSERIOUSINJURY
3AVEALLWARNINGSANDINSTRUCTIONSFORFURTURE
REFERENCE4HETERMhPOWERTOOLvINALLOFTHEWARNINGS
LISTEDBELOWREFERSTOYOURMAINSOPERATEDCORDED
POWERTOOLORBATTERYOPERATEDCORDLESSPOWERTOOL
1. Work area safety
a. Keep work area clean and well lit. #LUTTEREDOR
DARKAREASINVITEACCIDENTS
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. 0OWERTOOLS
CREATESPARKSWHICHMAYIGNITETHEDUSTORFUMES
c. Keep children and bystanders away while
operating a power tool. $ISTRACTIONSCANCAUSEYOU
TOLOSECONTROL
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. $ONOTUSEANY
ADAPTERPLUGSWITHEARTHEDGROUNDEDPOWERTOOLS
5NMODIFIEDPLUGSANDMATCHINGOUTLETSWILLREDUCE
RISKOFELECTRICSHOCK
b. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. 4HEREISANINCREASEDRISKOFELECTRIC
SHOCKIFYOURBODYISEARTHEDORGROUNDED
c. Do not expose power tools to rain or wet
conditions. 7ATERENTERINGAPOWERTOOLWILL
INCREASETHERISKOFELECTRICSHOCK
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. $AMAGEDORENTANGLEDCORDS
INCREASETHERISKOFELECTRICSHOCK
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. 5SEOF
ACORDSUITABLEFOROUTDOORUSEREDUCESTHERISKOF
ELECTRICSHOCK
f. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. 5SEOFAN2#$REDUCES
THERISKOFELECTRICSHOCK
3 Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. !MOMENTOFINATTENTIONWHILE
OPERATINGPOWERTOOLSMAYRESULTINSERIOUSPERSONAL
INJURY
b. Use personal protective equipment. Always
wear eye protection. 0ROTECTIVEEQUIPMENTSUCH
ASDUSTMASKNONSKIDSAFETYSHOESHARDHATOR
HEARINGPROTECTIONUSEDFORAPPROPRIATECONDITIONS
WILLREDUCEPERSONALINJURIES
c. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. #ARRYINGPOWERTOOLSWITH
YOURFINGERONTHESWITCHORENERGISINGPOWERTOOLS
THATHAVETHESWITCHONINVITESACCIDENTS
d. Remove any adjusting key or wrench before
turning the power tool on. !WRENCHORAKEYLEFT
ATTACHEDTOAROTATINGPARTOFTHEPOWERTOOLMAY
RESULTINPERSONALINJURY
e. Do not overreach. Keep proper footing and
balance at all times. 4HISENABLESBETTERCONTROLOF
THEPOWERTOOLINUNEXPECTEDSITUATIONS
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. ,OOSECLOTHESJEWELLERY
ORLONGHAIRCANBECAUGHTINMOVINGPARTS
g. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.5SEOF
DUSTCOLLECTIONCANREDUCEDUSTRELATEDHAZARDS
4. Power tool use and care
a. Do not force the power tool. Use the correct
TECHNICAL DATA
Cordless Drill/ Driver
Voltage
No Load Speed
Max. Torque
Drilling Capacity
– Wood/Steel
– Chuck Capacity
Weight
Battery
Voltage
Capacity
Weight
Charger
Approx. Charging Time
CD1200
12
700
8
25/10
1.0-10
0.94
12
1.2
0.47
6
CD9600
9.6
700
7.5
25/10
1.0-10
0.87
9.6
1.2
0.37
6
V
rpm
Nm
mm
mm
kg
V
Ah
kg
Hour