Need help?Do you have a question about the Black & Decker CD961 and is the answer not in the manual?
General| Brand | Black & Decker |
|---|---|
| Model | CD961 |
| Category | Drill |
| Language | English |
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire and/or serious injury.
Keep work area clean, avoid explosive atmospheres, and keep children/bystanders away during operation.
Use correct plugs, avoid earthed surfaces, keep away from water, do not abuse cords, use outdoor cords, use RCD in damp locations.
Stay alert, use PPE, prevent unintentional start, remove keys, maintain balance, dress properly.
Do not force tool, use correct tool, ensure switch works, disconnect power before adjustments, store out of reach, maintain tools, keep cutters sharp, use according to instructions.
Recharge with specified charger, use correct battery packs, keep away from metal objects, avoid battery liquid contact.
Have tool serviced by qualified person using identical replacement parts.
Wear ear protection, use auxiliary handles, hold insulated surfaces, secure workpiece, check for wiring/pipes, avoid hot drill bits.
Never open, do not expose to water/heat, store below 40°C, charge between 10-40°C, use provided charger, follow disposal instructions, handle leakage carefully.
Use correct charger, never charge non-rechargeable batteries, replace defective cords, do not expose to water, do not open/probe charger.
Declared vibration emission values measured per EN 60745 for comparing tools and preliminary exposure assessment.
User must read the instruction manual to reduce the risk of injury.
Charger is double insulated; check mains voltage matches rating plate. Damaged cord must be replaced.
Lists key components: Torque adjustment collar, forward/reverse slider, trigger switch, chuck, battery release button.
Remove battery before assembly. Do not overload the tool during operation.
Battery must be charged before first use and when power is insufficient.
Charge battery in base, avoid forcing. Charging time is approx. 3 hours for most applications.
Warning: Do not use the tool while it is connected to the charger.
Use forward/reverse control button to set rotation direction and lock the tool.
Rotate torque collar; higher numbers increase torque. Position 17 is drill mode with no clutch.
Press trigger switch to turn on; speed varies with pressure. Release trigger to turn off.
Press trigger switch for low speed, press further for high speed. Release trigger to turn off.
Apply light pressure, decrease before breakthrough, use backing wood, use appropriate bits and lubricant.
Use correct bit, apply lubricant for difficult screws, hold tool and bit in line with screw.
Clean ventilation slots, motor housing. Do not use abrasive cleaners. Open chuck and tap to remove dust.
Dispose of product separately, recycle used products and packaging to prevent pollution.
Run battery down, remove from tool. NiCd, NiMH, Li-Ion batteries are recyclable.
Details no load speed, torque, chuck capacity, drilling capacity, weight, battery voltage, charger specs, and charge time.
Declared sound pressure and acoustic power levels according to EN 60745.
Declared vibration values for drilling and screwdriving according to EN 60745.
States compliance with relevant EC directives and standards for the products.
24-month guarantee for defects in materials/workmanship within EU/EFTA, excluding misuse or unauthorized repair.
Submit proof of purchase to seller or authorised agent. Find agents via local office or www.2helpU.com.
Register new products and get updates on offers via www.blackanddecker.co.uk.
To Next Page
