9
ENGLISH
Technical data
No load speed min-1 0-550rpm 0-550rpm
Max. torque Nm 8 8
Chuck capacity mm 10 10
Max drilling capacity
Steel mm 10 10
Wood mm 10 10
Weight kg 1.35 1.27
Battery V 12 9,6
Charger TR/KS JDA-14 JDA-12
Charger voltage input TR/KS 220-230V 220-230V
Charger output (voltage) V 13 11
Charger output (current) mA 450 500
Chuck capacity mm 10 10
Charge time hr 5-7 5-7
Level of sound pressure according to EN 60745:
CD961
Sound pressure (L
pA
) 64 dB(A), uncertainty (K) 3 dB(A)
Acoustic power (L
WA
) 75 dB(A), uncertainty (K) 3 dB(A)
CD121K
Sound pressure (L
pA
) 65 dB(A), uncertainty (K) 3 dB(A)
Acoustic power (L
WA
) 76 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
CD961
Drilling into metal (a
h, ID
) 2.1 m/s
2
, uncertainty (K) 1.5 m/s
2
Screwdriving without impact (a
h, tv
) 0.76 m/s
2
,
uncertainty (K) 1.5 m/s
2
CD121K
Drilling into metal (a
h, ID
) 2.3 m/s
2
, uncertainty (K) 1.5 m/s
2
Screwdriving without impact (a
h, tv
) 0.79 m/s
2
,
uncertainty (K) 1.5 m/s
2
CD121K CD961
EC declaration of conformity
MACHINERY DIRECTIVE
CD121K/CD961
Black & Decker declares that these products described
under "technical data" are in compliance with:
98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009),EN60745-1, EN60745-2-1
These products also comply with Directive 2004/108/EC,
2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of Black &
Decker.
Kevin Hewitt
Vice-President Global Engineering
Black & Decker Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD
United Kingdom
08/06/2013
To Next Page
Loading...
Need help?
General
