1
INSTRUCTION MANUAL
20V max* Trimmer/edger
CATALOG NUMBERS
LST300
To register your new product, visit
www.BlackandDecker.com/NewOwner
KEY INFORMATION YOU SHOULD KNOW:
The guard must be installed before trimming or edging - if not, the motor will overheat.
When replacing the line, use only .065 inch diameter ROUND line (B+D Model #AF-100
is recommended) - otherwise the trimmer will not function properly.
Do not bump the feed head against the ground - it will disrupt the automatic feed
mechanism.
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER purchase, go to
http://www.blackanddecker.com/instantanswers
available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under a workload,
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Black&Decker CS1840 o
To Next Page
Need help?
General
