2
Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDS
When using your iron, basic safety precautions should always be followed,
including the following:
❍ READ ALL INSTRUCTIONS BEFORE USING
❍ Use iron only for its intended use.
❍ To protect against a risk of electric shock, do not immerse the iron in
water or other liquids.
❍ The iron should always be turned to the minimum (min) setting
before plugging or unplugging from outlet. Never yank cord to
disconnect from the outlet; instead grasp plug and pull to disconnect.
❍ Do not allow cord to touch hot surfaces. Let iron cool completely
before putting away. Loop cord loosely around iron when storing.
❍ Always disconnect iron from electrical outlet when filling with water
or emptying, and when not in use.
❍ Do not operate iron with a damaged cord, or if the iron has been
dropped or damaged. To avoid the risk of electric shock, do not
disassemble the iron; take it to a qualified service person for
examination and repair, or call the appropriate toll-free number
on the cover of this manual. Incorrect reassembly can cause a risk
of electric shock when the iron is used.
❍ Close supervision is necessary for any appliance being used by or
near children. Do not leave iron unattended while connected or on an
ironing board.
❍ Burns can occur from touching hot metal parts, hot water or steam.
Use caution when you turn a steam iron upside down or use the
surge of steam – there may be hot water in the reservoir. Avoid rapid
movement of iron to minimize hot water spillage.
❍ The iron must not be left unattended while it is connected to the
supply mains.
❍ The plug must be removed from the socket-outlet before the water
reservoir is filled with water.
❍ The iron must be used and rested on a stable surface.
❍ When placing the iron on its stand, ensure that the surface on which
the stand is placed is stable.
❍ The iron is not to be used if it has been dropped, if there are visible
signs of damage or if it is leaking.
To Next Page
Loading...
Need help?
General
