To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker DR330 and is the answer not in the manual?
General| Type | Corded Drill |
|---|---|
| Voltage | 120V |
| Speed | Variable |
| Chuck Type | Keyless |
| Amperage | 5.2 Amps |
| No Load Speed | 0-1500 RPM |
| Chuck Size | 3/8 inch |
Keep work area clean and well lit to avoid accidents.
Follow electrical safety guidelines to prevent shock and fire hazards.
Stay alert, use PPE, and prevent unintentional starting for personal safety.
Proper use, maintenance, and care of power tools to ensure safety.
Guidelines for safe charging and use of battery packs.
Professional servicing and use of identical replacement parts for safety.
Use ear protection and auxiliary handles for drills to prevent injury.
Minimize dust exposure, use NIOSH/OSHA approved respiratory protection.
Understand safety symbols and definitions for hazard recognition.
Use extension cords of appropriate gauge based on voltage and ampere rating.
Overview of key features like variable speed switch, lock-on button, and gear selector.
First aid for gel exposure from comfort grip, wash with soap and water.
Avoid touching metal parts, hold tool by plastic handles to prevent shock.
Grip drill firmly, expect stalls, release trigger immediately if a stall occurs.
Ensure power supply matches tool's voltage and frequency rating.
Proper procedures for inserting and removing drill bits and accessories.
Instructions for removing and attaching chucks, including keyed and keyless types.
How to select forward or reverse rotation for drilling and screwdriving.
Set drilling mode for masonry or other materials and select two-gear speed.
Adjust depth stop for precise drilling depth on DR650 model.
Use clutch collar to set torque for screwdriving applications.
Operating the variable speed switch and lock-on button for tool control.
General drilling advice and guidance for wood, metal, and masonry.
Common causes and solutions for a unit that will not start.
Clean tool with mild soap and damp cloth; avoid liquids.
Information on recommended accessories and locating service centers.
Details of the product warranty against defects in material or workmanship.
Table showing maximum drill bit sizes for various materials.
