What to do if my Black & Decker Chainsaw will not start?
If your Black & Decker Chainsaw won't start, there are several things to check: * Ensure the lock button is pressed. * Make sure the front guard is not in the brake position; if it is, reset it. * Check the fuse and replace it if it's blown. * Verify the RCD (Residual Current Device). * Confirm that the mains lead is properly connected to the power supply.
What to do if my Black & Decker GK1935T is not using oil?
If your Black & Decker Chainsaw is not using oil, it could be due to debris in the tank. Empty the oil from the tank and replace it with fresh oil. Check for a blocked oil hole in the cap and remove any debris. Also, check the chain bar and oil outlet for debris, removing any that you find, and clean the chain bar.
How to improve cutting performance of my Black & Decker GK1935T Chainsaw?
If your Black & Decker Chainsaw isn't cutting well, make sure the chain is facing the correct direction. If the chain direction is correct, the chain may need sharpening.
Why is the bar/chain on my Black & Decker Chainsaw hot/smoking?
If the bar and chain on your Black & Decker Chainsaw are hot or smoking, it could be due to several reasons. First, check the oil tank level and refill if empty. Also, inspect the oil hole on the chain bar for any blockages and clean it. Ensure that the chain tension isn't too tight and check the chain tension. Finally, the guide bar sprocket nose may need greasing; oil it if necessary.
Why is the bar/chain on my Black & Decker GK1935T Chainsaw hot or smoking?
If the bar or chain of your Black & Decker Chainsaw appears hot or is smoking, it could be due to several reasons: * The oil tank might be empty. Check the oil tank level and refill if necessary. * The oil hole on the chain bar could be blocked. Clean the oil hole to ensure proper lubrication. * The chain tension might be too tight. Check and adjust the chain tension. * The guide bar sprocket nose may need greasing. Oil the guide bar sprocket nose.
General| Automatic Oiling | Yes |
|---|---|
| Chain Brake | Yes |
| Tool-Free Chain Tensioning | Yes |
| Type | Electric |
| Power Source | Corded |
| Bar Length (in) | 16 in |
| Chain Speed (m/s) | 8.5 m/s |
| Bar Length (cm) | 35 cm |
To Next Page