Need help?Do you have a question about the Black & Decker GKC1825L and is the answer not in the manual?
General| Type | Cordless Chainsaw |
|---|---|
| Power Source | Battery |
| Battery Voltage | 18V |
| Voltage | 18V |
| Battery Type | Lithium-Ion |
| Battery Capacity | 2.0 Ah |
| Bar Length | 25 cm |
| Chain Speed | 3.5 m/s |
| Weight | 2.5 kg |
| Automatic Oiler | Yes |
| Tool-Free Chain Tensioning | Yes |
| Chain Pitch | 3/8 inch |
| Amperage | 2.0 Ah |
Ensures the work area is clean and well-lit, and prohibits operation in explosive atmospheres.
Guidelines for matching plugs, avoiding earthed surfaces, and protecting the tool from water.
Advises staying alert, using PPE, preventing unintentional starting, and dressing properly.
Recommendations on not forcing the tool, checking the switch, and disconnecting power before adjustments.
Safety precautions for chainsaw operation, including body positioning, grip, and avoiding hazards.
Instructions for using Black & Decker chargers, including warnings about non-rechargeable batteries and damaged cords.
Details on double-insulated chargers, checking voltage, and cord replacement.
Step-by-step guide for attaching the guide bar and saw chain, including tensioning.
Procedures for checking, adjusting, and increasing the saw chain tension for optimal performance and safety.
Instructions for correctly inserting and removing the battery pack from the tool.
Guidance on charging the battery, including temperature recommendations and indicator lights.
Information on keeping the battery pack connected for maintenance charging.
Explains error indicators on the charger and troubleshooting steps for battery issues.
Instructions for filling the oil reservoir with recommended chain oil and checking the oil level.
Recommendations for chain oil type, frequency of lubrication, and method for oiling the chain.
How to start the chainsaw using the lock-off button and on/off switch, and advice on proper operation.
Steps to take if the saw chain or guide bar becomes jammed, including switching off and using wedges.
Ensures the oil reservoir is not allowed to fall below a quarter full.
Instructions for removing, cleaning, and oiling the guide bar and saw chain.
Importance of keeping saw chain teeth sharp for optimal performance.
Information on obtaining replacement saw chains from retailers or service agents.
Warning that chain cutters blunt immediately upon contact with ground or nails.
Regularly checking the saw chain tension is important for operation.
Guidance on seeking repairs from qualified persons using original spare parts.
To Next Page