(Original instructions)
u Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u Regularly clean the cutting line and spool using a soft
brush or dry cloth.
u Regularly use a blunt scraper to remove grass and dirt
from the underneath of the guard.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you nd one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker ofce at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
GL4525
Type 1
GL5028
Type 1
GL5530
Type 1
Input Voltage
V
AC
230 230 230
Power Input
W
450
500 550
No-Load Speed
min
-1
7300 7200 7300
Weight
kg
1.3 1.5 1.5
Hand/arm weighted vibration value according to EN 786:
= 2.5 m/s
2
, uncertainty (K) = 1.5 m/s
2
.
L
PA
(sound preasure) 81 dB(A)
uncertainty (K) = 1 dB(A)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
