Need help?Do you have a question about the Black & Decker GL650 and is the answer not in the manual?
General| Power | 650 W |
|---|---|
| Cutting Width | 30 cm |
| Line Diameter | 1.5 mm |
| Handle Type | Loop handle |
| Power Source | Electric |
| Line Feed System | Automatic |
| Voltage | 230 V |
Explains the meaning of warning symbols used in the manual.
Provides essential safety advice for operating the appliance.
Always wear safety glasses or goggles when operating the tool.
The cutting line continues to run briefly after the appliance is switched off.
Keep people and animals at least 6 meters away from the cutting area.
Do not expose the appliance to rain or high humidity.
Appliance is double insulated and does not require an earth wire.
Avoid body contact with earthed or grounded surfaces.
Use of a high-sensitivity residual current device (RCD) improves electric safety.
Instructions for replacing the mains plug, including fuse details.
Guidance on connecting wires to terminal screws and cable restraint.
Lists all parts provided in the product packaging.
Identifies and lists the main parts of the grass trimmer.
Instructions for securely attaching the guard to the trimmer.
How to free the cutting line taped for transit.
Steps for attaching the plant protector accessory.
Guidance on connecting the tool to the power outlet via extension cable.
How to set the trimmer head for standard trimming.
How to set the trimmer head for edging lawn borders.
How to adjust the secondary handle for optimal balance.
How to set the trimmer head angle for different tasks.
How to adjust the tool's height using the telescopic body.
Instructions for operating the on/off switch.
Advice for effective trimming, including cutting technique.
Recommendations for achieving optimal edging results.
Advice for achieving optimum cutting results, such as cutting dry grass.
Cleaning ventilation slots, cutting line, and guard.
Step-by-step guide to replacing the cutting line spool.
Instructions for winding cutting line onto an empty spool.
Checks for spool rotation and line protrusion when tool runs slowly.
Steps to resolve issues with the automatic line feed system.
Information on guarantee periods, coverage, and exclusions.
Details on obtaining service and support after purchase.
Fields for dealer address, purchase date, and product registration.
Options for opting out of receiving further information.
Guidance on completing and sending the guarantee card after purchase.
To Next Page
