Black & Decker GL670 User Manual

1
GL650
GL660
GL660P
GL670
GL670P

Black & Decker GL670 Specifications

General

Power	600 W
Cutting Width	33 cm
Line Diameter	1.5 mm
Weight	2.8 kg
Power Source	Electric
Voltage	230 V
Line Feed System	Automatic
Handle Type	Adjustable Handle

Summary

GRASS TRIMMER GL650/GL660/GL660P/GL670/GL670P

EC DECLARATION OF CONFORMITY

States compliance with EU directives for product safety and performance.

INTENDED USE

Details the specific applications and consumer focus for the grass trimmer.

SAFETY INSTRUCTIONS

Provides essential guidelines to prevent injury and damage during operation.

Know your appliance

Introduces the user to the parts and features of the tool.

Work area

Personal protection

Using your appliance

Safety of others

After use

Inspection and repairs

Additional safety instructions for grass trimmers

ELECTRICAL SAFETY

Mains plug replacement (U.K. & Ireland only)

Instructions for safely replacing the power plug in specific regions.

Using an extension cable

CARTON CONTENTS

OVERVIEW (fig. A)

ASSEMBLY

Fitting the guard (fig. B)

Details how to attach the safety guard to the trimmer.

Releasing the cutting line (fig. A)

Explains how to free the cutting line for use.

Fitting the plant protector (fig. C)

Instructions for attaching the accessory to shield plants.

Connecting the tool to the mains (fig. A)

Guides on how to safely connect the trimmer to a power source.

USE

Setting the tool to trimming or edging mode (fig. D, E & F)

Trimming mode (fig. D & F)

Specific instructions for using the tool for general grass trimming.

Edging mode (fig. E & F)

Specific instructions for using the tool to trim lawn edges.

GL670/GL670P - Adjusting the position of the secondary handle (fig. A & G)

GL660/GL660P/GL670/GL670P - Adjusting the height of the tool (fig. A & H)

GL670/GL670P - Adjusting the trimmer head angle (fig. I)

Switching on and off (fig. A)

Hints for optimum use

Trimming

Advice specific to the trimming operation.

Edging

Advice specific to the edging operation.

General

General tips applicable to all uses.

GL660P/GL670P - Using the plant protector (fig. J)

MAINTENANCE

Fitting a new spool of cutting line (fig. K & L)

How to replace the spool with fresh cutting line.

Winding new line onto an empty spool (fig. M, N & P)

Instructions for rewinding line onto an empty spool.

TROUBLESHOOTING

Tool runs slowly

Automatic line feed does not work

PROTECTING THE ENVIRONMENT

GUARANTEE

The guarantee policy

Specific terms and conditions related to the product guarantee.

OTHER OUTDOOR TOOLS