To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker KA185 and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Orbit Diameter | 2 mm |
| Dust Collection | Yes |
| Dust Extraction | Yes |
| Cable Length | 2 m |
| Soft Grip | Yes |
| Paper Attachment | Hook and loop |
| Action | Orbital |
General guidelines for safe tool operation, keeping the work area clean and secure.
Specific safety measures for sanding paint and MDF, addressing lead paint risks.
Personal protection measures like wearing masks, avoiding eating/drinking in the work area.
Minimizing dust generation and tracking during paint removal for environmental protection.
Procedures for cleaning the work area and disposing of materials after sanding.
Explanation of the tool's double insulation for user safety and electrical protection.
Electrical safety precautions, including checking voltage and using appropriate cables.
Instructions for replacing the mains plug in the UK, including fuse requirements.
Guidelines for using extension cables, specifying length, wiring, and condition.
Information on environmentally safe disposal of old tools via service agents.
Details of the 2-year repair guarantee for UK, Australia, and New Zealand.
Information on the nationwide network of authorized service agents.
Importance of using genuine Black & Decker accessories for optimal tool performance.
Information on sound pressure levels and recommended hearing protection.
Diagram illustrating the main parts of the sander.
Steps to prepare the sander for use, including disconnecting power and fitting sandpaper.
Instructions on how to fit different types of sandpaper to the sander's base.
How to connect the sander to a vacuum cleaner or fit the dust bag.
How to use the variable speed control for optimal material sanding.
Instructions on how to switch the sander on and off.
Tips for better sanding results, including holding the sander and sanding technique.
Instructions for maintaining the sander, including cleaning and vent clearing.
Statement of conformity with EEC directives and noise/vibration levels.
Details of the 2-year repair guarantee for Australia and New Zealand.
Supplementary guarantee terms and conditions for product defects.
Specific conditions under which the supplementary guarantee does not apply.
Information on statutory rights that complement the Black & Decker guarantee.
Section for filling out warranty registration details.
Instructions on what to do upon purchasing the product for warranty registration.
Steps to follow when making a warranty claim for defective products.
