To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker KD352 and is the answer not in the manual?
General| Brand | Black & Decker |
|---|---|
| Model | KD352 |
| Category | Drill |
| Language | English |
Instructions for fitting drill bits into a keyed chuck by rotating the barrel and using the chuck key.
Procedure to remove a keyless chuck by loosening a set-screw and using an Allen key and hammer.
Procedure to remove a keyed chuck by opening jaws, turning a screw, and using the chuck key with a hammer.
How to attach and position the auxiliary side handle for better grip and control.
Guidance on setting the depth stop for accurate hole drilling based on screw length.
Steps to set up the drill, including accessory fitting, speed, direction, and depth stop.
