Need help?Do you have a question about the Black & Decker KD975 and is the answer not in the manual?
General| Soft grip | Yes |
|---|---|
| Chuck type | Key |
| Input power | 710 W |
| Power source | AC |
| AC input voltage | 230 V |
| Idle speed (max) | 980 RPM |
| Impact rate (high speed) | 5780 bpm |
| Drilling diameter in wood (max) | 30 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in concrete (max) | 22 mm |
Comprehensive safety guidelines for operating power tools, covering work area, electrical safety, personal protection, and tool usage.
Specific safety advice for rotary and chiselling hammers, including ear protection, auxiliary handles, and accessory use.
Guidelines for protecting bystanders and children from hazards associated with power tool operation.
Instructions on choosing between drilling, hammer drilling, and hammering modes using the selector dial.
How to switch between forward and reverse rotation for drilling, screwing, and chiselling operations.
Guide on adjusting the depth stop for precise drilling depth control using the side handle.
To Next Page
