EasyManua.ls Logo

Black & Decker LSW20 - Troubleshooting; Unit and Battery Issues

Black & Decker LSW20
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
MAINTENANCE
CLEANING AND STORAGE
CAUTION: DO NOT POUR OR SPRAY WATER
ON THE UNIT.
Use only mild soap and a damp cloth to clean the unit. Never let
any liquid get inside the unit; never immerse any part of the unit
into a liquid.
Your sweeper should be stored in a dry place. Do not store the unit
on or adjacent to fertilizers or chemicals. Such storage can cause
rapid corrosion of the metal parts.
TROUBLESHOOTING
Problem Possible Cause Possible Solution
Unit will Battery not installed • Check battery
not start. properly. installation.
Battery not charged. • Check battery
charging
requirements.
Battery will • Battery not inserted Insert battery into
not charge. into charger. charger until green
LED appears.
Charger not plugged in. Plug charger into a
working outlet. Refer
to “Important Charging
Notes” for more
details.
Check current at
receptacle by plugging
in a lamp or other
appliance.
Check to see if
receptacle is
connected to a light
switch which turns
power off when you
turn out the lights.
Surrounding air tempera- Move charger and
ture too hot or too cold. tool to a surrounding
air temperature of
above 40 degree F
(4.5°C) or
below 105 degree
F(+40.5°C).
For assistance with your product, visit our website www.blackanddecker.
com for the location of the service center nearest you or call the BLACK &
DECKER help line at 1-800-544-6986.

Related product manuals