LACK+
C
TM
40V MAX _ LiTHiUM HARD
SURFACE SWEEPER VAC
iNSTRUCTiON HANUAL
CATALOG NUMBER
LSWV36
For use only with LB series 36v or 40v Max* batteries.
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THiS PRODUCT FOR ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER purchase, go to http://www.blackanddecker.com/
instantanswers. If you can't find the answer or do not have access to the Internet, call 1-800-544-6986 from 8 a.m. to 5 p.m. EST
P1on.-Fri. to speak with an agent. Please have the catalog number available when you call.
SAVE THiS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
INSTRUCTIVO DEOPERACION,CENTROS DE SERVlCIOY POLIZA DE GARANT{A.ADVERTENCIA: LEEASEESTEINSTRUCTWOANTES DEUSAREL PRODUCTO,
_Maximum initial battery pack voltage (measured without a workload) is40 volts. Measured under a workload, nominal voltage is 36.
To Next Page
Need help?
General