4
HOW TO USE
WARNING: Do not heat an empty Kettle! The concealed heating element
in the bottom of the Kettle is protected by an automatic safety device. If
your kettle is accidentally plugged in without being filled or is allowed to
boil dry, it will automatically repeat a cycle of turning off, cooling down,
and coming back on unless unplugged. If this happens, unplug the Kettle,
fill with cold water, and wait a few minutes before replacing it on the Base
and plugging in.
TEA KETTLE PARTS
Spout
Whistle
Kettle
Base
Cord Wrap
(Under Base)
Handle
MAX FILL Line
(Inside Spout)
To Next Page
Loading...
