Need help?Do you have a question about the Black & Decker MT3000K and is the answer not in the manual?
General| Voltage | 120V |
|---|---|
| Oscillation Angle | 2.8 degrees |
| Variable Speed | Yes |
| Kit Box | Yes |
| Power Source | Corded |
| Amperage | 2.5A |
| Oscillations per Minute | 10, 000 - 14, 000 OPM |
| Tool Type | Multi-Tool |
| Accessory Fitment | Universal |
| Accessories Included | Sanding Pad |
Power tool plugs must match the outlet. Never modify the plug in any way.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not force the power tool. Use the correct power tool for your application.
Before drilling into walls, floors or ceilings, check for the location of wiring and pipes.
Always wear a dust mask whenever sanding. Thoroughly remove all dust after sanding.
Tool heads can be easily exchanged. Depress the head release button and take the head off.
Pull the sleeve backward. Insert the bit shaft into the bit holder.
Hold the tool with the sanding base facing upwards. Place the sanding sheet onto the sanding base.
To Next Page