Black & Decker MTD100 - Installing and Removing Battery Pack; Battery Pack Installation; Battery Pack Removal

7

 
 
 
 
 
 
 
 
 











WARNING: Shock hazard
 Never attempt to open the battery pack for any
reason. If the plastic housing of the battery pack breaks or cracks,
return to a service center for recycling.
INSTALLING AND REMOVING THE BATTERY PACK
WARNING: Make certain the lock-off button is engaged to
prevent switch actuation before removing or installing battery.
TO INSTALL BATTERY PACK:


figure 2
TO REMOVE BATTERY
PACK: D
 

2