Black & Decker Orb-it ORB48 - Technical Data

9
ENGLISH
(Original instructions)
You can check the location of your nearest authorised
repair agent by contacting your local Black & Decker ofce
at the address indicated in this manual. Alternatively, a list
of authorised Black & Decker repair agents and full details
of our after-sales service and contacts are available on the
Internet at: www.2helpU.com
Battery (Fig. E)
Z
If you want to dispose of the product
yourself, the battery must be removed as
described below and disposed of in accord-
ance with local regulations.
u Discharge the battery by operating the appliance until
the motor stops.
u Using a screwdriver, carefully remove the decorative
facia (13) by inserting it into the recess (14) and lifting.
u Remove the four screws (15) holding the body of the
appliance together.
u Lift the housing cover away from the assembly.
u Lift out the battery pack / motor assembly.
u Detach all lead connections from the battery pack /
motor assembly.
u Remove battery pack / motor assembly.
u Place the battery pack in a suitable package to ensure
that the terminals can not be short-circuited.
u Take the battery to your service agent or to a local
recycling station.
Once removed, the battery can not be retted.
Technical data
ORB48 (H1)
Voltage V
dc
4.8
Battery
Type
NiMH
Weight kg
0.75
Charger
BA090020D
VA090020D
Input voltage V
ac
230
Output voltage V
ac
9
Current mA
200
Approximate
charge time
h
16
Weight kg 0.22