9
ENGLISH
(Original instructions)
Cutting branches
• Cut downward and away from your body.
• Make the cut close to the main branch or
tree body.
Maintenance
Your BLACK+DECKER corded/cordless
appliance/tool has been designed to
operate over a long period of time with a
minimum of maintenance. Continuous
satisfactory operation depends upon proper
tool care and regular cleaning.
Warning! Before performing any
maintenance on corded/cordless power
tools:
• Switch off and unplug the appliance/tool.
* Or switch off and remove the battery
from the appliance/tool if the
appliance/tool has a separate battery
pack.
• Or run the battery down completely if it
is integral and then switch off.
• Regularly clean the ventilation slots in
your appliance/tool/charger using a soft
brush or dry cloth.
• Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
Technical Data
RS890 (Type 1)
Input voltage V
AC
220-240
Power input W 500
Number of strokes min
-1
0 - 2700
Stroke length mm 23
Max. depth of cut mm
Wood 100
Steel 3
Plastic pipe ø 50
Prunning ø 50
Weight kg 2.7
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 88.5 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 95.5 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to
EN 60745: (Jig saw mode)
Cutting boards (a
h, B
) 6.4 m/s
2
, uncertainty (K) 1.5 m/s
2
Cutting sheet metal (a
h, M
) 11.6 m/s
2
, uncertainty (K) 1.5 m/s
2
Vibration total values (triax vector sum) according to
EN 60745: (Reciprocating saw mode)
Cutting boards (a
h, B
) 5.9 m/s
2
, uncertainty (K) 1.5 m/s
2
Cutting wooden beams (a
h, WB
) 8.5 m/s
2
,
uncertainty (K) 1.5 m/s
2
To Next Page
Loading...
