C
Christopher NelsonAug 1, 2025
Why Black & Decker Snow Blower doesn’t run when bail handle is activated?
- DDebra ColeAug 1, 2025
If your Black & Decker Snow Blower doesn’t run when you activate the bail handle, first check that the safety key is fully installed and seated, and that you're fully depressing the button on the switch housing before pulling the bail handle. If it still doesn't work, release the bail handle to turn the snow thrower off, remove the safety key and battery pack. Then, check that the auger is free to turn, the battery cavity is free of debris and properly connected, and that the battery has been fully charged.