Black Box IC408A-R2 Quick Start Guide

Place the Local Extender where desired and connect
the CAT5e/6/7 patch cable from the Link port (RJ-45)
to a network switch or wall network port connected
to a switch.
Maximum 330 ft. (100 m)
between devices
Place the Remote Extender where desired. Connect
the CAT5e/6/7 patch cable from the Link port (RJ-45)
to a network switch or wall network port connected
to a switch and connect the Remote Extender
to a power source.
Maximum 330 ft. (100 m)
between network devices
Order toll-free in the U.S. or for FREE 24/7 technical support: Call 877-877-BBOX
(outside U.S. call 724-746-5500)
www.blackbox.com • info@blackbox.com
Contact
Information
February 2010
MT1000A-85-R4
4-Port USB 2.0 Extender over LAN Quick Start Guide
IC408A-R2
1
1
3
Before you get started, ensure that all the drivers required for your USB device(s) are installed.
Network Connect
Connect the Local Extender to the computer using
the included USB cable.
Computer
Attach the USB device(s) to the Remote Extender.
2
4

Black Box IC408A-R2 Specifications

General

Brand	Black Box
Model	IC408A-R2
Category	Extender
Language	English