Need help?Do you have a question about the Black Box LB510A-R2 and is the answer not in the manual?
General| Model | LB510A-R2 |
|---|---|
| Category | Extender |
| Manufacturer | Black Box |
| Video Resolution | 1920 x 1200 |
| Maximum Resolution | 1920 x 1200 |
| Transmission Distance | 100 m (328 ft) |
| Power Supply | 5 V DC |
| Distance | Up to 328 ft (100 m) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Cable Type | CATx |
| Maximum Distance | 100 m (328 ft) |
| Power | 5 V DC, 1 A |
Lists key features of the LB510A-R2, such as data rates and connectivity options.
Details the LB510A-R2's function as a G.SHDSL CPE and its connection methods.
Details the physical connector for power input, including AC and DC options.
Explains configuration via CLI and DIP switches.
Details DIP switch settings, functions, and system reset mode.
Details the requirements and procedure for connecting the DSL interface using twisted pair wire.
Instructions for connecting the device to AC or DC power sources.
Explains the function of the front panel LEDs (Power, DSL, Link, Activity) for monitoring device status.
Discusses test modes like loopbacks and PRBS pattern generators.
Details the power supply requirements and specifications for AC and DC adapters.
To Next Page