Black Box LB510A-R2 - Factory Default Values for Software-Configuration Parameters; Interface Pinouts

724-746-5500 | blackbox.com
Page 39
Reset configuration to factory defaults
C. INTERFACE PINOUTS
C.1 LINE PORT
C.1.1 RJ-45
• Pin 4: Tip
• Pin 5: Ring
• Pins 1, 2, 3, 6, 7, 8: no connection
C.2 ETHERNET PORT
C.2.1 RJ-45 SOCKET 10/100B ASE -T
• Pin 1: TX+
• Pin 2: TX-
• Pin 3: RX+
• Pin 6: RX-
NOTE: Pins not listed are not used.