66
ULTRA2 LVD SCSI HOST ADAPTER
/B:b Scan all the devices on PCI BUS #b
The range for “b” is from 0 to 7 decimal.
/Q:q Specifies maximum decimal number of tag commands per target
(default 4)
/!Q No tag
/WR Read after write, hardware-verify
/!WR Don’t verify (default)
/R Support removable media (default)
/!R Will not support removable media
/D Enable support for fixed disk drive (default)
/!D Disable support for fixed disk drive
To Next Page
Loading...