79
CHAPTER 5: Driver Installation
5.9.4 R
EMOVING THE
D
RIVER FROM A
U
NIX
W
ARE
S
YSTEM
1. Once a UnixWare session is established and a command prompt is ready, type
“/etc/conf/bin/idinstall -d a100 <ENTER>” (recall that UnixWare is case-
sensitive) to delete these files:
/etc/conf/mdevice.d/a100
/etc/conf/sdevice.d/a100
/etc/conf/pack.d/a100/driver.o
/etc/conf/pack.d/a100/space.c
/etc/conf/pack.d/a100/disk.cfg
2. Then rebuild the UnixWare kernel by executing the following commands at
the system prompt:
/etc/conf/bin/idbiuld -B -K <ENTER>
/cp /etc/conf/cf.d/unix /stand/unix <ENTER>
cd/ <ENTER>
shutdown -g0 <ENTER> (the “0” in “-g0” is a zero)
Y <ENTER>
To Next Page
Loading...