71
CHAPTER 5: Driver Installation
/B:b Scan all the devices on PCI BUS #b
The range for “b” is from 0 to 7 decimal.
/A:n Assigns adapter number based on BIOS address
/DM:t,t,... Enable direct-access-storage-device (DASD) manager support
The “t”s here and in the next three options stand for the SCSI
target IDs of the affected devices; these must be separated by
commas. Refer to your OS/2 documentation for more information
about the DASD manager function.
/!DM:t,t,... Disable DASD manager support
/SM:t,t,... Enable SCSI manager support
Refer to your OS/2 documentation for more information about
the SCSI manager function.
/!SM:t,t,... Disable SCSI manager support
/Q:q Specifies maximum decimal number of tag commands per target
(default 4)
/!Q No tag
To Next Page
Loading...