LE180A 10Base-T Transceiver
• Stand-Alone model
• Attached Unit Interface (AUI) to
Ethernet RJ-45 connectors
• No external power requirement
NETWORK SERVICES
General Description . . . . . . .2
Connectors & Cables . . . . . . .3
Installation . . . . . . . . . . . . . .6
Operations . . . . . . . . . . . . . .8
Technical Specifications . . . .9
Cable Specifications . . . . . .10
Troubleshooting . . . . . . . . .10
Contact Us . . . . . . . . . . . . .11
The LE180A transceiver is a media access unit
(MAU) that connects the AUI port of data
terminal equipment, repeaters, or other
network devices either directly or through an
AUI cable to an Ethernet 10BASE-T device. The Ethernet device is connected to the
transceiver through an unshielded or shielded twisted-pair copper cable with RJ-45
connector ends.
Workstation
Black Box
Transceiver
Black Box
Transceiver
Workstation
10-Base-T Hub
Black Box
Transceiver
HUB with AUI Port
Or
Or
Various System Configurations
Figure 1 shows various examples of transceiver system configurations.
Figure 1: Transceiver System Configurations
To Next Page
Need help?
General
