Need help?Do you have a question about the Black Box LGB1110A and is the answer not in the manual?
General| Stackable | - |
|---|---|
| Certification | CE, FCC Part 15, Class A |
| Product color | Black |
| Rack mounting | Yes |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 10 |
| Throughput | 14.88 Mpps |
| Jumbo frames | 9216 |
| MAC address table | 8000 entries |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Switch type | Managed |
| Switch layer | L2+ |
| Networking standards | IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3az |
Weight and Dimensions| Depth | 134 mm |
|---|---|
| Width | 221 mm |
| Height | 38.1 mm |
| Weight | 1400 g |
Explains how to install, connect, configure, and monitor the Gigabit Managed Ethernet Switch.
Details the key functions and capabilities of the Gigabit Managed Ethernet Switch.
Guides through the initial setup and login process for the switch's web interface.
Configures system contact, name, and location for the switch.
Configures IP addresses, subnet masks, default gateways, and IP routes for the switch.
Configures DHCP server settings, including mode, VLAN ranges, excluded IPs, and IP pools.
Manages user accounts, privilege levels, authentication methods, SSH, HTTPS, and access management.
Configures Spanning Tree Protocol to detect and disable network loops, providing backup links.
Displays basic system information like model name, firmware version, and MAC address.
Shows the status of the IP protocol layer, including IP interfaces, routes, and neighbor cache.
Displays general traffic statistics for all switch ports, including packets, bytes, errors, drops, and filtered.
Shows detailed QoS queuing counters for switch ports and queues.
Displays statistics for Access Management, including HTTP, HTTPS, SSH, and TELNET.
Shows the Port Security status, including user module legend, port status, and MAC counts.
Issues ICMP PING packets to troubleshoot IPv4 and IPv6 connectivity issues.
Runs cable diagnostics to test link status and identify cable problems.
Restarts the switch for maintenance, preserving configuration files.
Resets the switch configuration to factory default values.
Updates the firmware controlling the switch to enhance functionality.
Manages switch configuration files, including saving, uploading, downloading, and activating.
To Next Page