Page 5
724-746-5500 | blackbox.com
Chapter 2: Preparing for Installation
3. Users MUST power off the Wireless Ethernet Extender first before connecting
the external antenna to it. Do not switch from a built-in antenna to the external
antenna from WEB management without physically attaching the external
antenna onto the unit; otherwise, the Wireless Ethernet Extender might be
damaged.
What‘s Included
Your package should contain the following items. If anything is missing or
damaged, contact Black Box Technical Support at 724-746-5500 or
info@blackbox.com.
The LWE121A, LWE121AE, and LWE121UK packages contain the following items:
• (1) IEEE 802.11n Wireless Ethernet Extender
• (2) detachable 5-dBi antennas
• (2) pole-mounting rings
• (1) 24-VDC power cord and PoE injector
• (1) ferrite suppression core
• (1) grounding wire
• This printed quick installation guide
The LWE121A-KIT and LWE121UK-KIT packages contain:
• (2) IEEE 802.11n Wireless Ethernet Extenders
• (4) detachable 5-dBi antennas
• (4) pole-mounting rings
• (2) 24-VDC power cords and PoE injectors
• (2) ferrite suppression cores
• (2) grounding wires
• This printed quick installation guide
To download the user manual from the Web site:
1. Go to www.blackbox.com
2. Enter the part number (LWE121A) in the search box:
3. Click on the “Resources” tab on the product page, and select the document
you wish to download.
NOTE: Users MUST use the power cord and PoE injector shipped in the box with
the Wireless Ethernet Extender. Using other options will damage the unit.
To Next Page
Loading...
