Black Country Customs TI-BOOST User Manual (English)

To Next Page

Notes

* The TI-BOOST is a true bypass pedal.

* Unplug any instrument when not in use.

* When storing the unit for long periods of time,

disconnect the battery

* To access/change the battery remove the base

of the pedal.

* You may hear some loss of level and unwanted

distortion when the battery begins to run down

TI-BOOST manual

Specication

for further information and examples of Tony Iommi’s

actual settings, plus additional applications visit

www.blackcountrycustoms.co.uk

Need help?

Do you have a question about the Black Country Customs TI-BOOST and is the answer not in the manual?

Black Country Customs TI-BOOST Specifications

General

Controls the amount of drive, from clean to lead tones.

Shapes the overall low frequency response of the pedal.

Connect this jack to the input of your amplifier.

Manages output level, can drive amp or attenuate.

3-position switch for LO mid boost, flat, or hi end boost.

Shapes the overall high frequency response of the pedal.

Connect this jack to the output of your instrument.

Input for external 9V external D.C. power supply.