To Next Page
E
Elizabeth ContrerasJul 27, 2025
Why is my BLACK DECKER Pro not steaming?
- DDr. Kelly AndersonJul 27, 2025
If your BLACK DECKER Iron isn't producing enough steam, or any steam at all, there are several potential causes. First, check that the steam setting isn't set to Dry Iron (off) or too low. Adjust the Variable Steam Selector to the appropriate steam level for your fabric. Also, ensure there's enough water in the tank, filling it to the Max level marker following the instructions in the “filling the water tank” section. Finally, if the iron hasn’t fully preheated, the Anti-Drip feature might be preventing steam. Give the iron more time to heat up.
General