Black Max BM25TEC - Storing the Attachment; Storing the Product

14 — English
MAINTENANCE
THIS PRODUCT WAS MANUFACTURED WITH A CATALYST MUFFLER
Congratulations! You have made an investment toward protecting the environment. In order to maintain this product’s
original emission level, please refer to the maintenance section below.
MAINTENANCE SCHEDULE
Inspect For Clean Replace Replace
Maintenance Damage Before Every Every 25 Hours Every
Part Each Use 5 Hours or Yearly 125 Hours
* CATALYTIC MUFFLER ASSEMBLY..................................................................................................................X
SPARK SCREEN
........................................................................................................ X
* AIR FILTER ASSY
includes:
Filter Screen
........................................................................ X
* CARBURETOR ASSY
includes:
Gaskets
........................................ X
* FUEL TANK ASSY
includes:
Fuel Lines
..................................... X
Fuel Cap .......................................X
Fuel Filter................................................................................................................... X
* IGNITION ASSY
includes:
Spark Plug
................................................................................................................. X
* NOTICE:
THE USE OF EMISSION CONTROL COMPONENTS OTHER THAN THOSE DESIGNED FOR THIS UNIT
IS A VIOLATION OF FEDERAL LAW.
STORING THE ATTACHMENT
 Store the attachment indoors in a dry, well-ventilated
place that is inaccessible to children.

Keep away from corrosive agents such as garden chemi-
cals and de-icing salts.
STORING THE PRODUCT
 Clean all foreign material from the product. Store idle unit
indoors in a dry, well-ventilated area that is inaccessible
to children. Keep away from corrosive agents such as
garden chemicals and de-icing salts.

Abide by all ISO and local regulations for the safe storage
and handling of gasoline.
When storing 1 month or longer:

Drain all fuel from tank into a container approved for
gasoline. Run engine until it stops.