Black Max BM3716VNM - User Manual

ENGINE FAMILY: *HCPS.0384CA
FAMILLE DE MOTEUR : *HCPS.0384CA
FAMILIA DE MOTOR: *HCPS.0384CA
WARNING: To reduce the risk of injury, the user must
read and understand the operator’s manual before using this
product.
ADVERTENCIA: Para reducir el riesgo de lesiones, el
usuario debe leer y comprender el manual del operador antes
de usar este producto.
TABLE OF CONTENTS
 General Safety Rules ............................................................2-3
 Specific Safety Rules ............................................................3-4
 Symbols ................................................................................5-6
 Glossary of Terms .................................................................... 7
 Features ................................................................................8-9
 Assembly ............................................................................9-10
 Operation ..........................................................................10-24
 Maintenance .....................................................................24-37
 Bar and Chain Combinations .................................................37
 Troubleshooting ................................................................38-39
 Parts Ordering/Service ............................................. Back Page
ÍNDICE DE CONTENIDO
 Reglas de seguridad generales ...........................................2-3
 Reglas de seguridad específicas .........................................3-4
 Símbolos ..............................................................................5-6
 Glosario de términos ............................................................... 7
 Características .....................................................................8-9
 Armado ..............................................................................9-10
 Funcionamiento ...............................................................10-24
 Mantenimiento .................................................................24-38
 Combinaciones de barra y cadena ....................................... 38
 Corrección de problemas ................................................39-40
 Pedidos de piezas/servicio ................................ Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
NOTICE AVISO
Do not use E15 or E85 fuel in
this product. It is a violation of
federal law and will damage the
unit and void your warranty. Only use unleaded gasoline
containing up to 10% ethanol.
No utilice combustibles E15 o E85 con este producto. Esto
constituye una violación a la ley federal, dañará la unidad y
anulará la garantía. Utilice únicamente gasolina sin plomo
que contiene hasta 10% de etanol.
BM3716 / BM3716VNM
16 in. 38cc Chain Saw
Motosierra de 40 cm (16 pulg.), 38 cc
BM3818 / BM3818VNM
18 in. 38cc Chain Saw
Motosierra de 45,72 cm (18 pulg.), 38 cc
OPERATOR’S MANUAL
MANUAL DEL OPERADOR
To register your Black Max product, please visit:
www.blackmaxtools.com
Para registrar su producto de Black Max, por favor visita:
www.blackmaxtools.com

Summary

General Safety Rules

Specific Safety Rules

Refueling (DO NOT SMOKE!)

Safe procedures for adding fuel to the chain saw.

Kickback

Explanation of kickback and how to avoid it.

Operation

Fuel and Refueling

Safe practices for handling and using fuel.

Handling the Fuel Safely

Detailed safety instructions for fuel handling.

Ethanol-Blended Fuels

Mixing the Fuel

Instructions on how to properly mix fuel and lubricant.

Filling the Fuel Tank

Bar and Chain Lubrication

Importance and method of lubricating the bar and chain.

Adding Bar and Chain Lubricant

Operating the Chain Brake

How to engage and disengage the chain brake.

Starting the Engine

Step-by-step guide for starting the engine.

Stopping the Engine

Procedures for safely shutting down the engine.

Adjusting Idle Speed

Kickback Precautions

Measures to prevent and mitigate kickback incidents.

Proper Grip on Handles

Proper Cutting Stance

Felling Trees

Detailed instructions and safety for felling trees.

Bucking

Techniques for cutting a fallen tree into logs.

Bucking Logs Under Stress

How to safely cut logs that are bent or under pressure.

Overbucking

Underbucking

Limbing

Pruning

Cutting Springpoles

Safety precautions when cutting tensioned poles.

Maintenance

Replacing the Guide Bar and Chain

Steps for replacing the guide bar and chain assembly.

Adjusting the Chain Tension

How to properly set the chain tension for optimal performance.

Chain Maintenance

Sharpening the Cutters

Proper technique for filing and sharpening chain cutters.

Maintaining the Guide Bar

Mounting the Anti-Kickback Nose Guard

Adjusting the Carburetor

Procedures for adjusting the carburetor for optimal performance.

Inspecting and Cleaning Chain Brake

Troubleshooting

Black Max BM3716VNM Specifications

General

Brand	Black Max
Model	BM3716VNM
Category	Chainsaw
Language	English